Looking for Brand Ambassadors - For more information on commissions or to Register with us for consideration click here!



BYO Grip Profile

Regular price $55.00

Shipping calculated at checkout.

Choose the grip profile that you would like to use. This sets the base price for your custom grips. Then select other options to further Build Your Own grips.

If your profile cut is not listed, you can contact us to see if it is on our list of future profiles.

  • 1911 Full Size - will fit the standard Government/Commander models.  You can measure from the top of the top grip screw to the bottom of the bottom grip screw. Our full size grips measure 3.3" inches (3 5/16th). These are also the standard thickness of approximately 1/4" inch. They also have the cut out notch for a standard ambidextrous thumb safety. There are 3 checkering options depending on your custom images.
  • 1911 Compact size - will fit the standard Officer models.  You can measure from the center of the top grip screw to the center of the bottom grip screw. Our compact size grips measure  2 11/16th" (68 millimeters). These are also the standard thickness of approximately 1/4" inch. They also have the cut out notch for a standard ambidextrous thumb safety.
  • Beretta 92 will fit compatible models.  These are the standard thickness of approximately 1/4" inch. There are cuts for 92F/FS/M9, 92S - with the mag release on the bottom, 92X/M9A3, and the 92X Compact, and standard 92 Compact. (will not fit Taurus PT92)
  • Browning 1911-22 & 380 models.  These are the standard thickness of approximately 1/4" inch.
  • Colt Mustang Pocketlite, thickness approximately 13/64". There is a checkering option for this profile.
  • Sig Sauer P938, thickness approximately 3/16". There are two options, flat bottom to accommodate the LEGION magwell and the Beveled bottom for most other models.

 

To build Your Own Custom grips, follow the steps below.

First you must select a Grip Profile <Click to Select>
Second, select the Wood Type of the grips <Click to Select>
Then you can optionally select a Stain Color if you chose Maple or Cherry Wood <Click to Select>
You can also optionally choose a final Protective Coating <Click to Select>
Last, you can either choose: 
--Engraved Pattern <Click to Select> 
--Engraved Stock Image <Click to Select> 
--Custom Image <Click to Select>